HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 80

2 auditDump auditDump Displays or clears the audit log. Synopsis auditdump -s | -show auditdump -c | -clear Description Use this command to display or clear the audit log on the switch. The audit log persistently saves the most recent 256 log entries on the switch. On modular platforms, the entries are not shared across CPs. To display or clear the logs, this command must be issued for each CP separately. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -s | -show Displays the audit log on the switch or the CP. -c | -clear Clears the audit log on the switch or the CP. Examples To display the audit log: switch:admin> auditdump -s 0 AUDIT, 2008/08/11-13:14:53 (UTC), [SULB-1003], INFO, FIRMWARE, NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, , Firmwarecommit has started. 1 AUDIT, 2008/08/11-13:16:12 (UTC), [SULB-1003], INFO, FIRMWARE, NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, , Firmwarecommit has started. 2 AUDIT, 2008/08/11-13:17:30 (UTC), [SULB-1003], INFO, FIRMWARE, NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, , Firmwarecommit has started. [output truncated] To clear the audit log: switch:admin> auditdump -C See Also auditCfg 50 Fabric OS Command Reference 53-1001337-01