HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 775

portThConfig 2 none No action. -buffer value Specifies the buffer value for in range behavior. A buffer defines a zone within which event criteria are met, rather than a single threshold value. This operand is required with the -trigger above | below options and valid only with these options. -nosave Prevents the configuration changes from being saved persistently. This option allows you to make and view changes without overwriting the saved configuration. When you use --set with the -nosave option and the switch reboots your changes will be lost. --apply Applies custom or default configuration for thresholds, actions, or both. This command allows you to choose between custom and default settings. The specified configuration takes effect upon execution of this command. When you select custom, the saved configuration becomes effective. port_type The following operands are required: Specifies the port type to which to apply the configuration. Valid port types include one of the following: e-port Applies configuration to all E_Ports. fop-port Applies configuration to all optical F_Ports. Configuring copper F_Ports is currently not supported. -area area port Applies configuration to all physical ports. Specifies the area monitored by the Fabric Watch daemon. For a description of valid areas, refer to the listing under --set port_type -area area. ve-port Specifies the port type to be configured as an VE_Port. -area ve_port_area Specifies the area monitored on a VE_Port. For a description of valid areas, refer to the listing under --set ve-port area ve_port_area. -action_level default | custom Instructs Fabric Watch to use the default or custom action configuration for the specified port type and area. -thresh_level default | custom Instructs Fabric Watch to use the default or custom threshold configuration for the specified port type and area. --help Displays the command usage. Examples To set custom thresholds for the port class and CRC area with E-mail alerts: switch:admin> portthconfig --set port -area crc -highthreshold -value 2 -trigger above -action email switch:admin> portthconfig --set port -area crc -highthreshold -trigger below -action email switch:admin> portthconfig --set port -ar crc -lowthreshold -value 1 -trigger above -action email switch:admin> portthconfig --set port -ar crc -lowthreshold -trigger below -action email Fabric OS Command Reference 745 53-1001337-01