HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 538

2 nsZoneMember nsZoneMember Synopsis Displays the information on online devices zoned with a specified device. nszonemember pid | wwn nszonemember -a | -u Description Use this command to display information on all online devices zoned with the specified device. The device can be specified by WWN or Port ID (PID). Use this command with the -u option to display all unzoned devices in the entire fabric. Use the -a option to display online zoned device data for each local device. The command output displays the following information: Type U - known, N - N_Port, NL - NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port world wide name (WWN). NodeName The device's node WWN. Permanent Port Name The physical N_Port or NL_Port WWN. DeviceType The device type. Port Index The index of the port to which the device is attached. Shared Area Whether or not the device shares an area with other devices. Device Shared in Other AD Whether or not the device is shared in other Admin Domains. Additional lines may display if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA • port and node symbolic name (local device only) • fabric port name • hard address or port IP address Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: PID | WWN Specifies the port ID or WWN of the device for which to display zoned devices. -a Displays each local device's online zoned device data, including the device PID and zone alias. 508 Fabric OS Command Reference 53-1001337-01