HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 722
Protocol: FCoE and portSpeed: 10Gbps. Only, Free buffer available interrupts.
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 722 highlights
2 portShow Edge fabric's version stamp If the EX_PORT is connected to an edge switch with FCS policy enforcement, the version of the security database is displayed. Otherwise displays N/A. The portShow command displays FCoE ports with "Protocol: FCoE" and "portSpeed: 10Gbps". Only a subset of information is displayed. Refer to the example section for an illustration. Use fcoe --cfgshow and fcoe --loginshow to display FCoE-specific configuration details. If the port is configured as a VE_Port, the command shows FC and Physical layer attributes of the underlying port, as well as status information regarding the underlying FCIP link for those logical FC ports that are instantiated over a physical 1/10GbE port. Refer to the example section for an illustration. Following the general information, the command displays three columns of counters. The first column shows interrupt statistics: Interrupts Total number of interrupts. Unknown Interrupts that are not counted elsewhere. Lli Low-level interface (physical state, primitive sequences). Proc_rqrd Frames delivered for embedded N_Port processing. Timed_out Frames that have timed out. Rx_flushed Frames requiring translation. Tx_unavail Frames returned from an unavailable transmitter. Free_buffer Free buffer available interrupts. Overrun Buffer overrun interrupts. Suspended Transmission suspended interrupts. Parity_err Central memory parity errors. 2_parity_err Secondary transmission parity errors. CMI_bus_err Control message interface errors. The second column displays link error status block counters. The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column also displays the number of loop initialization protocols (LIPs) received, number of LIPs transmitted, and the last LIP received. Examples To display the current state of a port: switch:admin> portshow 6 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x1000490b PRESENT ACTIVE E_PORT T_PORT T_MASTER G_PORT U_PORT LOGICAL_ONLINE LOGIN LED portType: 18.0 portState: 1 Online Protocol: FC 692 Fabric OS Command Reference 53-1001337-01