HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 112

2 cfgMcdtmode cfgMcdtmode Configures zoning features in McDATA Fabric mode. Synopsis cfgMcdtMode [--enable | --disable | --help] [safezoning | defaultzoning] Description Use this command to enable or disable either the McDATA safe zoning feature or the McDATA default zoning feature. Enabling or disabling safezoning or default zoning on one switch in the fabric enables or disables the specific feature fabric-wide, meaning that the feature is disabled or enabled on all switches in the fabric. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is effective only when the Brocade switch or director is in McDATA fabric mode. Operands This command has the following operands: --enable Enables McDATA zoning features. --disable Disables McDATA zoning feature. safezoning defaultzoning --help If safezoning is disabled, and if the zone database does not match, a zone merge occurs when the E_Port comes online. The E_Port will segment only if the zone merge fails. If safezoning is enabled, there is no zone merge as part of the E_Port coming online, and the E_Port will segment only if the zone database does not match. If defaultzoning is disabled, and if there is no zone database, devices in the fabric will not be able to see each other. If there is a zone database, devices NOT part of the Zone DB will not be able to see each other. If defaultzoning is enabled, and if there is no zone database, all devices in the fabric will be able to see each other. If there is a zone database, all devices NOT part of the Zone DB will be able to see each other. Displays command help. Examples To enable fabric-wide McDATA safe zoning: switch:admin> cfgmcdtmode --enable safezoning To disable fabric-wide McDATA safe zoning: switch:admin> cfgmcdtmode --disable safezoning To enable fabric-wide McDATA default zoning: switch:admin> cfgmcdtmode --enable defaultzoning To disable fabric-wide McDATA default zoning: switch:admin> cfgmcdtmode --disable defaultzoning See Also interopMode, cfgSaveActiveToDefined 82 Fabric OS Command Reference 53-1001337-01