HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 366

2 fwMailCfg fwMailCfg Displays and configures Fabric Watch email alerts. Synopsis fwmailcfg Description Use this command to display or modify the configuration and status of the Fabric Watch email alert in the switch. Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on the classes. Each class can configure one email address as the alert message's receiver. For an email alert to function correctly, add the CP0 and CP1 IP addresses and hostnames to DNS and also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used to set and check this information. Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To configure email settings: switch:admin> fwmailcfg 1 : Show Mail Configuration Information 2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Email Alert 6 : Relay Host IP Configuration 7 : Quit Select an item => : (1..7) [7]1 Config Show Menu 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 : End-to-End Performance Monitor class 9 : Filter Performance Monitor class 10 : Security class 11 : Resource class 12 : FRU Class 13 : Quit Select an item => : (0..13) [11] 1 mail configuration information Email Alert = disable Mail Recipients = NONE 336 Fabric OS Command Reference 53-1001337-01