HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 452

2 iscsiCfg Description Note Operands iscsicfg --show transaction [-h] iscsicfg --clear all [-h] iscsicfg --commit all [-f] [-h] Use this command to configure all iSCSI entities (such as authentication (CHAP), discovery domains (DD), discovery domain sets (DDSet), iSCSI virtual targets (VT), and LUN maps). Common actions include --add, --delete, --modify, --show, --enable and --disable; however, not all actions are valid for all operands. Use --commit all to save all entity changes to nonvolatile memory. This triggers the propagation of changes to all iSCSI-enabled switches and blades in the fabric. Changes do not take effect until a --commit all command is issued. Make all necessary configuration changes before issuing --commit all. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command has the following operands: auth CHAP parameters. Actions on auth include: --create auth -u username -s CHAP_secret [-h] Creates a CHAP entry with a CHAP secret of CHAP_secret for username. --modify auth -u username -s CHAP_secret [-h] Modifies the secret associated with an existing user. --delete auth -u username [-h] Deletes the CHAP entry associated with the specified username. --clear auth [-h] Deletes the entire authentication database. --show auth [-u username] [-h] Displays the username and status for the specified user. If username is not specified, all users in the database are displayed. tgt iSCSI virtual target parameters. Actions on tgt are: --easycreate tgt [-w port_wwn] [-h] Creates iSCSI targets with all available FC targets in one step. If port_wwn is specified, all LUNs of that target are imported into one virtual target. If no port_wwn is specified, all FC targets are imported into virtual targets. The names for the iSCSI targets are the target prefix followed by the port WWN. --easycreate tgt -s [-h] Shows the Node and Port WWNs which is used for any easycreate operation from this switch. --create tgt -t target_name [-h] Creates a target entry with the specified target_name. The target_name needs to be in IQN format. --delete tgt -t target_name [-h] Deletes a target entry with the specified target_name. 422 Fabric OS Command Reference 53-1001337-01