HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 967

zoneRemove 2 zoneRemove Synopsis Removes a member from a zone. zoneremove "zonename", "zoneMemberList" Description Use this command to remove one or more members from an existing zone. If all members are removed, the zone is deleted. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zonename" Specify the name of the zone from which to remove a member. Double quotation marks are optional. "zoneMemberList" Specify a member or a list of members to be removed from the specified zone. The list must be enclosed in double quotation marks. Members must be separated by semicolons. A member can be one or more of the following: • A switch domain and port index pair: for example, "2,20". Use switchShow for a list of valid port index numbers. • A world wide name • A zone alias name Examples To remove "array2" from "Blue_zone": switch:admin> zoneremove "Blue_zone", "array2" See Also zoneAdd, zoneCreate, zoneDelete, zoneShow Fabric OS Command Reference 937 53-1001337-01