HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 414

2 interopMode -s Safe Zone Specify 1 to enable the McDATA Safe Zone feature. Specify 0 to disable the McDATA Safe Zone feature. Examples To display the current interop mode and command usage: switch:admin> interopmode --show InteropMode: McDATA Fabric ( IM2 ) Default Zone: Off Safe Zone: Off Domain Id offset: 0x20 To turn Safe Zone on while in IM2: switch:admin> interopmode --enable -safezone MCDT default/safe zone will be changed. Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Fabric ( IM2 ) Default Zone: Off Safe Zone: On Domain Id offset: 0x20 To disable interoperability mode and to verify the result: switch:admin> interopmode --disable The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: Off To enable McDATA Open Fabric mode (IM3) and to set the domain offset to 0x80. switch:admin> interopmode --enable -im3 -domainoffset 0x80 The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Open Fabric ( IM3 ) Domain Id offset: 0x80 To enable 239 Domain ID mode in IM3: switch:admin> interopmode --enable -domainoffset 0xFF The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Open Fabric ( IM3 ) Domain Id offset: 0xff 384 Fabric OS Command Reference 53-1001337-01