HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 142

2 configRemove configRemove Synopsis Deletes a saved configuration file. configremove -local|-USB|-U [file] Description This command deletes a configuration file that was previously saved to the local chassis or to an attached USB device by using the configUpload command. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -local Removes a configuration file that was previously created by configUpload -local from the local chassis. -USB | -U Removes a configuration file that was previously created by configUpload -USB from an attached USB device. The options -USB and -U are equivalent. file Specifies the configuration file to be removed. If the -file option is omitted, the command prompts for a file name. Examples To remove a configuration file from the local chassis: switch:admin> configremove -local first_config.txt To remove a configuration file from an attached USB device without specifying a filename: switch:admin> configremove -USB File Name [config.txt]: second_config.txt See Also configDownload, configUpload, configList, configShow 112 Fabric OS Command Reference 53-1001337-01