HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 462

2 iscsiPortCfg iscsiPortCfg Synopsis Displays or modifies iSCSI port parameters. iscsiportcfg --clearstats slot/geport iscsiportcfg --default slot/geport iscsiportcfg --show slot/geport [-v] iscsiportcfg --modify slot/geport options Description Use this command to display or modify the iSCSI port parameters. The default iSCSI port settings are as follows: TABLE 18 Default iSCSI port settings Setting Default Error recovery level Connections per session Connections per session Header digest support Immediate data support First burst length value 0 1 Disabled Disabled No 512 Note Operands The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command has the following operands: --modify -e value -c value -d value -a value -i value -f value Modifies the port parameters on the specified port. Valid options are: Specifies the error recovery level; values are 0, 1, or 2. Specifies the TCP of connections; values are 1 or 2. Enables or disables data digest support; specify 0 to disable or 1 to enable. Enables or disables header digest support; specify 0 to disable or 1 to enable. Enables or disables immediate data support; specify 0 to disable or 1 to enable. Specifies the first burst length value; values include 512, 1024, 2048, 4096, 8192, 16384, and 32768. --clearstats Clears port-level iSCSI statistics on the specified port. --default Resets the port to the default values. See the "Description" section for the list of default values. 432 Fabric OS Command Reference 53-1001337-01