HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 874

2 supportShowCfgDisable supportShowCfgDisable Disables a group of commands under the supportShow command. Synopsis supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog | systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi | ficon | ag | dce_hsl | crypto | fcip Description Use this command to disable a group of commands under the supportShow command. Use the supportShowCfgEnable command to enable groups of commands. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: os Disables the OS group commands. exception Disables the exception group commands. port Disables the port group commands. fabric Disables the fabric group commands. services Disables the service group commands. security Disables the security group commands. network Disables the network group commands. portlog Disables the portlog group commands. system Disables the system group commands. extend Disables the extend group commands. filter Disables the filter group commands. perfmon Disables the Performance Monitor group commands ficon Disables the FICON group commands. iswitch Disables the FC Router group commands. asic_db Disables the ASIC DB group commands. iscsi Disables the iSCSI group commands. ag Disables the Access Gateway group commands. dce_hsl Disables the DCE group commands. crypto Disables the encryption group commands fcip Disables the FCIP group commands. Examples To disable the OS group of commands under the supportShow command: switch:admin> supportshowcfgdisable os Config update Succeeded See Also supportShow, supportShowCfgEnable, supportShowCfgShow 844 Fabric OS Command Reference 53-1001337-01