HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 647
portcfgGeMediaType, GbE_port media_type, Using Fabric OS commands, Command, Availability, GbE_Port
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 647 highlights
portcfgGeMediaType 2 portcfgGeMediaType Synopsis Configures the media type for a GbE port. portcfggemediatype GbE_port media_type portcfggemediatype --help Description Use this command to configure the media type for the ge0 and ge1 ports on the Brocade 7800 platform. Two media types are supported, copper and optical (sfp). When a media type is not specified, this command displays the current media type for the specified GbE port. Alternately, use portCfgShow to determine the current media type. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is supported only on the Brocade 7800 and only on ge1 and ge0 ports. On all other platforms or ports, this command returns a "not supported message." Operands This command has the following operands: GbE_Port Specifies the GbE port. Valid ports are ge0 and ge1. This operand is required. media_type Specifies the media type. Valid media types are copper and optical. This operand is optional; if omitted, the current media type is displayed for the specified GbE port. --help Displays the command usage. Examples To configure ge1 in optical mode: switch:admin> portcfggemediatype ge1 optical To display the current configuration: switch:admin> portcfggemediatype ge1 Port ge1 is configured in optical mode See Also portCfgShow Fabric OS Command Reference 617 53-1001337-01