HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 900

2 switchViolation switchViolation Dumps the DCC violations for a switch. Synopsis switchViolation --dump -dcc Description Use this command to display all Device Connection Control (DCC) violations that have occurred on a switch. Internally the command searches "errdumpall" for the DCC violations. For each DCC violation, the command displays the device WWN and the port where the violation occurred. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command can be executed on both active and standby CPs. This command does not support High Availability (HA). Operands This command has the following operands. If executed without operands, the command prints the usage. --dump Displays specified policy violation. -dcc Specifies the violation type as DCC. Examples To display DCC violations for a switch: switch:admin> switchviolation --dump -dcc Device WWN Port 22:00:00:04:cf:75:59:87 10 See Also none 870 Fabric OS Command Reference 53-1001337-01