HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 410

2 interfaceShow attLsuOut nLsuOut attLsaOut nLsaOut Number of attempted transmissions of LSUs to the neighbor switch. Number of LSUs transmitted to the neighbor switch. Number of attempted transmissions of LSAs to the neighbor switch. Number of LSAs transmitted to the neighbor switch. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber portnumber For bladed systems only, specify the slot number of the port to be displayed, followed by a slash (/). Specify the number of the port to be displayed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, the interface information for all ports is displayed. When invoked without operands, this command displays the interface information for all ports on the switch (including non-E_Ports). Examples To display FSPF interface information: switch:user> interfaceshow 1/4 idbP = 0x1008b3d0 Interface 4 data structure: nghbP ifNo masterPort defaultCost cost delay lastScn lastScnTime upCount lastUpTime downCount lastDownTime downReason iState = 0x1008c668 = 4 = 4 (self) = 500 = 500 = 1 = 16 = Apr 02 20:01:44.458 = 2 = Apr 02 20:01:44.458 = 1 = Apr 02 20:01:09.050 = 2 = UP Neighbor 4 data structure: state lastTransition nghbCap nghbId idbNo remPort nflags initCount lastInit firstHlo nbstFull = NB_ST_FULL = Apr 02 20:01:44.512 = 0x0 = 100 = 4 = 52 = 0xf = 1 = Apr 02 20:01:44.460 = Apr 02 20:01:44.473 = Apr 02 20:01:44.512 380 Fabric OS Command Reference 53-1001337-01