HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 745

portShow 2 -active -epcb -fhpb -fdpb adrs -fchb -fcub -fdcb adrs -mem adrs -pools -pmmr -fastw -clear vlantag inbandmgmt Displays active FDCBs. Displays Emulation Control Block (port specific). Displays FICON Host Path Block. Displays FICON Device Path Block. Displays FICON Channel Control Block. Displays FICON Control Unit Control Block. Displays FICON Device Control Block. Displays memory in 256 byte increments: ! for next. Displays current data buffer pool counts. Displays PMMR pointers. Displays the FastWrite queue. Clears post display statistics; requires a preceding argument. Displays VLAN tag configuration settings. Displays the status of the inband management configuration and IP addresses configured to enable inband management on the Brocade 7500 through GbE port interfaces. This command requires a port to be specified and displays the IP addresses for that port. In addition the output shows whether inband management is enabled or disabled. To display the routing table, use the portshow iproute command. Examples To display iSCSI Port WWN and Sessions: switch:admin> portshow iscsi 2/ge0 GE Port 2/ge0 Port WWN Sessions 50:06:06:9e:40:09:a2:00 0 To display the connection parameter information for all FCIP tunnels on the switch and to show the current DiffServ markings being used for data connection as well as control connection (The following example displays high water marks in bold for the data and control TCP connections of Tunnel 0): switch:admin> portshow fciptunnel -all -params Port: ge0 Tunnel ID 0 Tunnel Description "This is a test Description of this tunnel" Remote IP Addr 192.168.10.2 Local IP Addr 192.168.44.9 Remote WWN Not Configured Local WWN 10:00:00:05:1e:38:84:65 Compression off Fastwrite off Tape Pipelining off Committed Rate 900000 Kbps (0.900000 Gbps) SACK on Min Retransmit Time 100 Keepalive Timeout 10 Max Retransmissions 8 Fabric OS Command Reference 715 53-1001337-01