HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 817

secPolicyFCSMove 2 secPolicyFCSMove Synopsis Moves a member in the FCS policy. secpolicyfcsmove [from, to] Description Use this command to move an FCS member from one position to another position in the FCS list. Only one FCS can be moved at a time. The first FCS switch in the list that is also present in the fabric is the Primary FCS. Notes If a backup FCS is moved to the first position, it becomes the primary FCS after activation. An FCS policy most be enabled to execute this command, and the command must be issued from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: from Specify the position of the FCS switch you want to move. to Specify the position to which you want to move the FCS switch. Examples To move the backup FCS switch from position 2 to position 3 in the FCS list (interactively): switch:admin> secpolicyfcsmove Pos Primary WWN DId swName. 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:5a 2 switch60. 3 No 10:00:00:60:69:00:00:13 3 switch73. Please enter position you'd like to move from : (1..3) [1] 2 Please enter position you'd like to move to : (1..3) [1] 3 DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:13 3 switch73. 3 No 10:00:00:60:69:00:00:5a 2 switch60. To move Backup FCS switch from position 3 to position 1 in the FCS list (non-interactively): switch:admin> secpolicyshow ACTIVE POLICY SET 1 Yes 10:00:00:05:1e:39:5f:67 2 switch1 2 No 10:00:00:05:1e:04:ef:0e 4 switch2 3 No 10:00:00:05:1e:35:cd:ef 200 switch3 Fabric OS Command Reference 787 53-1001337-01