HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 849

SnmpConfig 2 System Group Configuration Parameters sysDescr The system description. The default value is Fibre Channel switch. sysLocation The location of the system (switch). The default value is End User Premise. The string must be at least 4 characters in length; the maximum length is 255 characters. sysContact The contact information for this system (switch). The default value is Field Support. Refer to the definition of sysDescr, sysLocation and sysContact in the system group of MIB-II. The string must be at least 4 characters in length; the maximum length is 255 characters. authTraps When enabled, the authentication trap (authenticationFailure) is transmitted to a configured trap recipient in the event that the agent receives a protocol message that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this means that a request contains a community string that is not known to the agent. The default value for this parameter is 0 (disabled). Security Level Parameters The --show option displays the current SNMP GET security and SNMP SET security levels. Use --set secLevel to modify existing settings: SNMP GET security level Specifies security level for all SNMP GET requests. SNMP SET security level Specifies security level for SNMP SET requests only. Values are: 0 No security. 1 Authentication only. 2 Authentication and Privacy. 3 OFF Examples To display the SNMPv1 configuration: switch:admin> snmpConfig --show snmpv1 SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) Trap recipient: 10.32.147.113 Trap recipient Severity Level: 0 Community 2: OrigEquipMfr (rw) Trap recipient: 1080::8:800:200C:1234 Trap recipient Severity Level: 0 Community 3: private (rw) No trap recipient configured yet Community 4: public (ro) No trap recipient configured yet Community 5: common (ro) No trap recipient configured yet Community 6: FibreChannel (ro) No trap recipient configured yet To set the SNMPv1 configuration of a switch: switch:admin> snmpConfig --set snmpv1 SNMP community and trap recipient configuration: Community (rw): [Secret C0de] Fabric OS Command Reference 819 53-1001337-01