HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 905

sysMonitor 2 sysMonitor Synopsis Manages system memory or CPU usage. sysmonitor --config mem | cpu [-poll polling_interval] [-retry number_of_retries] [-limit high_usage_limit] [-action [raslog ] [snmp]] sysmonitor --show mem | cpu sysmonitor --help Description Use this command to configure system memory or CPU usage parameters on the switch or to display memory or CPU usage. Configuration options include setting a threshold for resource usage which, if exceeded, triggers a set of specified Fabric Watch alerts. You can set up the system monitor to poll at certain intervals and specify the number of retries required before Fabric Watch takes action. If executed without operands, the command prints the usage. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command supports the following operands: --show Displays system CPU or memory usage. The following operands are exclusive: mem Displays system memory usage. cpu Displays system CPU usage. --config Configures the parameters for monitoring system CPU or memory usage. The following parameters are configurable with this command. mem Configures the parameters for monitoring system memory usage. cpu Configures the parameters for monitoring system CPU. -poll Specifies the polling interval in seconds. Valid values are between 10 and 3600 seconds. The default value is 10 seconds. This operand is optional. -retry Specifies the number of retries before Fabric Watch takes action. The default value is 3. -limit Specifies the threshold at which Fabric Watch takes action. The threshold is defined as the percentage of resource usage that must be reached to trigger a Fabric Watch action. Valid values are 0 to 100. The default varies depending on the hardware platform. -actions Specifies the actions to be taken if system resources exceed the specified threshold. Valid values are snmp, raslog, or both. The default is none. --help Displays the command usage. Examples To configure the threshold for memory usage monitoring: switch:admin>sysMonitor --config mem -poll 10 -retry 1 -limit 20 -action snmp,raslog Fabric OS Command Reference 53-1001337-01 875 Juror Mana