HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 187

cryptoCfg 2 --create -container Creates a CryptoTarget container (CTC) for a disk or a tape storage device. The target device port WWN must be specified and one or more initiator port WWNs (PWWNs) may optionally be specified. Additional initiator PWWNs may be added after the CryptoTarget container is created. Upon commit of a CTC configuration, one virtual target (VT) is created, and for each initiator that has the access to the target port, one virtual initiator (VI) is created. These virtual devices are created by logging into the fabric and registering with the Name Server. Initiator and target must be zoned for NS-based frame redirection to take effect. Use nsshow to verify the creation of the virtual devices. Use cfgshow to view the redirection zone. This command is valid only on the group leader. The following operands are supported: disk | tape Specifies the type of the CTC as a disk array or tape storage container depending on the target device. These operands are mutually exclusive. crypto_target_container_name Specifies the CTC name for the storage device. The CTC name can be up to 31 characters long and include any alphanumeric characters and underscores. White space and other special characters are not permitted. This operand is required. EE_node_WWN [EE_slot_number] Specifies the WWN of the node to which the encryption engine belongs and on which encryption engine this particular CTC is hosted. This operand is required. On bladed systems, include the slot number. target_PWWN Specifies the target port WWN of the device port hosted on the encryption engine. This operand is required. target_NWWN Specifies the target node WWN. This operand is required. -initiator Specifies one or more initiators. Specifying initiators within a CTC does not mean that these initiators have access to the Crypto LUN. The initiator PWWNs still need to be specified when the LUN is added to the CTC to which these initiators should gain access. The initiators added to the CTC are used only for discovering the LUNs of the target as exposed to these initiators. This operand is optional. You may add initiators at the time when the CTC is created or any time thereafter with the --add -initiator command. The following operands are required when specifying an initiator: initiator_PWWN Specifies the initiator port WWN. initiator_NWWN Specifies the initiator node WWN. --delete -container Deletes a specified CTC. This command removes the virtual target and associated LUNs from the fabric. Before issuing this command, you must stop all traffic to the target port for which the CTC is being deleted. Failure to do so results in I/O failure between the initiators and that target Port. This command is valid only on the group leader. The following operand is required when deleting a CTC: Fabric OS Command Reference 157 53-1001337-01