HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 346

2 firmwareKeyUpdate Examples See also user keyfile passwd Specify a user name for FTP or SSH server access. This operand can be omitted, if the firmware key is accessible on a local directory or by anonymous FTP server access. A user name other than "anonymous" is required for SSH server access. Specify a fully qualified path for the firmware keyfile. Absolute path names may be specified using forward slashes (/). When updating from a USB device, the keyfile must reside in the /firmwarekey directory on the USB device. Specify a password. This operand can be omitted, if firmware is accessible through a local directory or an attached USB device, or if no password is required by the FTP server. This operand is required when accessing an SSH server. To update the public key from a server, using an automatically determined transfer protocol: switch:admin> firmwarekeyupdate 192.168.21.34,johndoe,/pub/dist/pubkey.pem,12345 Updating the public key, please wait... Public key successfully updated. To update the public key using the interactive method: switch:admin> firmwarekeyupdate Server Name or IP Address: 192.168.21.34 User Name: johndoe File Name: /pub/dist/pubkey.pem Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: Password: Updating the public key, please wait... Public key successfully updated. To update the public key from an external USB device: switch:admin>firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey.pem Updating the public key, please wait... Public key successfully updated. firmwareDownload, firmwareKeyShow, configure 316 Fabric OS Command Reference 53-1001337-01