HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 532

2 nsAllShow nsAllShow Synopsis Displays global name server information. nsallshow [type] Description Use this command to display the 24-bit Fibre Channel addresses of all devices in all switches in the fabric. If the type operand is supplied, only devices of specified FC-PH type are displayed. If type is omitted, all devices are displayed. Specifying the type operand causes the switch to send out a query to every switch in the fabric. On a large fabric you should not run a script that repeatedly issues the nsAllShow command with a type operand specified. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: type Specify the FC-PH type code. This operand is optional. The valid values for this operand are 0 to 255. Following are two specific FC-PH device type codes: 8 = FCP type device 4, 5 = FC-IP type device Other FC-PH types are displayed in the format "x ports supporting FC4 code," where x is the number of ports of a type and code is the FC-PH type code. Examples To display all devices in the fabric, followed by all type 8 (SCSI-FCP) devices and all type 5 (SCSI-FCIP) devices: switch:admin> nsAllShow { 011000 011200 0118e2 0118e4 0118e8 0118ef 021200 021300 0214e2 0214e4 0214e8 0214ef 12 Nx_Ports in the Fabric } switch:admin> nsAllShow 8 { 0118e2 0118e4 0118e8 0118ef 0214e2 0214e4 0214e8 0214ef 8 FCP Ports } switch:admin> nsAllShow 5 { 011200 021200 2 FC-IP Ports } See Also nsShow, switchShow 502 Fabric OS Command Reference 53-1001337-01