HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 631

portCfgCreditRecovery 2 portCfgCreditRecovery Synopsis Enables or disables credit recovery on a port. portcfgcreditrecovery --disable | --enable [slot/]port Description Use this command to enable or disable credit recovery on a port. The credit recovery feature enables credits or frames to be recovered. Only ports configured as long distance ports can utilize the credit recovery feature. The default credit recovery configuration is enabled. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. The Fabric OS port configuration commands are not supported on FCoE ports. Use fcoe --cfg to configure FCoE ports. Operands This command has the following operands: --disable Disables credit recovery configuration on the specified port. --enable Enables credit recovery configuration on the specified port. --help Displays the command usage. Examples To enable credit recovery on a port: switch:admin> portcfgcreditrecovery --enable 3/15 See Also To disable credit recovery on a port: portcfgcreditrecovery --disable 3/15 portCfgShow Fabric OS Command Reference 601 53-1001337-01