HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 387

haEnable 2 haEnable Enables the High Availability feature. Synopsis haenable Description Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is already enabled, this command has no effect. If the HA is disabled, this command enables it. The standby CP reboots as part of the process. The command displays a warning message and prompts for confirmation before rebooting the CP. Note The execution of this command is subject to Virtual Fabric or Admin Domain Restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To enable the High Availability feature: switch:admin> haenable Warning: This command will enable the HA. It will reboot the standby CP and require all telnet, secure telnet, and SSH sessions to the standby CP to be restarted Do you want to continue [y/n]? y To verify that High Availability is enabled: switch:admin> hashow Local CP (Slot 6, CP0): Active, Warm Recovered Remote CP (Slot 7, CP1): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized See Also haDisabl Fabric OS Command Reference 357 53-1001337-01