HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 231

errDelimiterSet 2 errDelimiterSet Synopsis Sets the error log start and end delimiters for messages sent to the console and syslog. errdelimiterset [-s "start delimiter string"][-e "end delimiter string"] Description Use this command to set the error log start and end delimiters for log messages sent to the console and syslog. An empty string clears the start and the end delimiters (including the colon) so that they are not displayed. If no arguments are supplied to the command, it instead displays the existing errDelimiterSet configuration. These delimiters are stored persistently. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -s "start delimiter string" Specify the alphanumeric string for the start delimiter; up to 10 characters are allowed. This operand is optional. -e "end delimiter string" Specify the alphanumeric string for the end delimiter; up to 10 characters are allowed. This operand is optional. Examples To display the start and end delimiters: switch:admin> errdelimiterset delimiter start string: delimiter end string: See Also To change the start and end delimiters (with sample output): switch:admin> errdelimiterset -s "Start" -e "End" Start2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name Server received an invalid request from device 10:02:32:A3:78:23:23:End errDump, errFilterSet, errShow Fabric OS Command Reference 201 53-1001337-01