HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 683

portErrShow 2 portErrShow Displays port error summary. Synopsis porterrshow Description Use this command to display an error summary for all ports. The display contains one output line per port. Numeric values exceeding 999 are displayed in units of thousands (k), or millions (m) if indicated. Values for the following parameters are displayed: frames tx Frames transmitted frames rx Frames received enc in Encoding errors inside frames crc err Frames with CRC errors crc g_eof Frames with CRC errors with good EOF. too shrt Frames shorter than minimum too long Frames longer than maximum bad eof Frames with bad end-of-frame delimiters enc out Encoding error outside of frames disc c3 Class 3 frames discarded link fail Link failures (LF1 or LF2 states) loss sync Loss of synchronization loss sig Loss of signal (increments whenever an SFP is removed) frjt Frames rejected with F_RJT fbsy Frames busied with F_BSY Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display error counters for ports on a switch: switch:admin> porterrshow frames enc crc crc too too bad enc disc link loss loss frjt fbsy tx rx in err g_eof shrt long eof out c3 fail sync sig 0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 3: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 4: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 5: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 6: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 7: 1.6k 24 0 0 0 0 0 0 11 0 0 4 8 0 0 Fabric OS Command Reference 653 53-1001337-01