HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 87

bcastShow 2 bcastShow Displays broadcast routing information. Synopsis bcastshow Description Use this command to display the broadcast routing information for all ports in the switch. The broadcast routing information indicates all ports that are members of the broadcast distribution tree: ports that are able to send and receive broadcast frames. Normally, all F_Ports and FL_Ports are members of the broadcast distribution tree. The broadcast path selection protocol selects the E_Port members of this tree in a manner designed to prevent broadcast routing loops. The following fields are displayed: Group The multicast group ID of the broadcast group (always 256). Member Ports A map of all ports in the broadcast tree. Member ISL Ports A map of all E_Ports in the broadcast tree. The broadcast routing information for the ports is displayed as a set of hexadecimal bit maps. Each bit in a bit map represents a port, with the least significant bit in each row representing port 0, 32, 64, and so on. Note The output from this command may vary, depending on the hardware platform. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the broadcastshow routing information for all ports in the switch: switch:admin> bcastShow Group Member Ports Member ISL Ports 256 0x00012083 0x00002080 0x00000440 0x00000400 0x00770000 0x00700000 0x00008200 0x00000000 0x00000001 0x00000000 In this example, from a switch with 128 ports, the member ports consist of ports 7, 13, 42, 84, 85, and 86. The final Member Ports bit set represents the embedded port (frames sent to be handled by firmware) and is typically set. See Also portRouteShow Fabric OS Command Reference 57 53-1001337-01