HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 295

fcrLsanMatrix 2 • Display the information saved in the cache. • Clear the information from the cache and revert to the saved value. • Display the information that is saved in the persistent memory (CLI command with no option). • Display the static and default/dynamic binding of the backbone to show which edge fabrics or FCRs can access each other. • Verify that the information in the cache is valid and does not disrupt existing import/export devices. • Run a quickmode to derive the LSAN Zone matrix from the current import/ export database. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands If no operands are specified, this command displays the persistent LSAN Zone matrix information. The following operands are optional: --add -lsan FID FID | -fcr wwn wwn Adds the pair of edge fabrics or FCR members that can access each other. If you specify --add with zero (0) value for FID or 00:00:00:00:00:00:00:00 for wwn, the command returns the cache to default mode. --remove -lsan FID FID | -fcr wwn wwn Removes the entry of the pair of FIDS. If no longer specified, the edge fabric assumes the default behavior. --apply -lsan | -fcr | -all Applies the information from the cache to the persistent memory only if there is no effect on the existing import/export devices. Otherwise, an error message is displayed. --cancel -lsan | -fcr Cancels the data that was not applied; reverts to the persistent information. --display -lsan | -fcr | -all Displays the information saved in the cache. --fabricview -lsan | -fcr Views all the static and default/dynamic fabric binding in the backbone. --verify -lsan | -fcr Verifies if the LSAN Zone information previously entered and stored in the cache can be successfully applied. The data is okay if the apply operation does not cause disruption to the traffic. --quickmode Derives the LSAN Zone matrix from the import/export setup. Fabric OS Command Reference 265 53-1001337-01