HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 368

2 fwPortDetailShow fwPortDetailShow Synopsis Displays the port information for specified user ports. fwportdetailshow [--p portNumber] | [--s portState] Description Use this command to print the overall status of a specified port. The output of this command is different for IPv4 and IPv6 addresses. The overall status is calculated based on the following contributors: Port Errors: LFA Number of link loss occurrences exceeded limit for time period LSY Number of sync loss occurrences exceeded limit for time period LSI Number of signal loss occurrences exceeded limit for time period PER Number of protocol errors exceeded limit for time period INW Number of invalid words exceeded limit for time period CRC Number of invalid CRC errors exceeded limit for time period PSC Port hardware state changed too often BLP Buffer limited port SFP Errors: STM SFP temperature is out of specification SRX SFP receive power is out of specification STX SFP transmit power is out of specification SCU SFP current is out of specification SVO SFP voltage is out of specification The overall status may be in one of the following: Healthy Every contributor is healthy Marginal One or more contributors are in this status Faulty Faulty hardware Offline Port has no connectivity or is disabled If the overall status is not healthy, the contributing factors also are listed. Notes This command requires a Fabric Watch license. Port errors are not supported for virtual ports and SFP errors are not applicable for virtual ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --p portNumber Yields a port detail report for a specific user port. 338 Fabric OS Command Reference 53-1001337-01