HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 54

2 ag --mapset N_Port [F_Port1; F_Port2;...] Maps a set of F_Ports to a specified "primary" N_Port forcing all traffic from the F_Ports to be routed through this N_Port to the attached fabric. An F_Port cannot be mapped to more than one primary N_Port at any given time. F_Ports are enabled only if the N_Port is online. This command overwrites existing port mappings. Use a blank list ("") to clear current mappings. --mapadd N_Port F_Port1 [; F_Port2;...] Adds one or more specified F_Ports to the mapping of an existing "primary" N_Port. The traffic for the configured F_Ports is routed to the fabric through the specified N_Port when the F_Ports come online. An F_Port cannot be mapped to more than one primary N_Port at the same time. --mapdel N_Port F_Port1 [; F_Port2;...] Deletes one or more specified F_Ports from the "primary" N_Port mapping. --pgshow [pgid] Displays the Port Group configuration. The port grouping feature supports specifying a set of N_Ports to be included in the Port Group (PG) Policy. The factory default PG is "pg0", which includes all N_Ports. The default PG cannot be removed or renamed. --pgcreate- pgid "N_Port1 [; N_Port2;...]" [-n pgname] [-m "lb; mfnm"] Creates a port group with the ID pgid and a specified list of N_Ports to be included in the policy. The list must be enclosed in quotation marks. Ports must be separated by semicolons. The Port Group ID must not exceed 64 characters. Optionally specify a name for the port group and a mode. Modes are by default disabled. For an explanation of mode values, refer to --pgsetmodes. --pgadd pgid "N_Port1 [; N_Port2;...]" Adds one or more N_Ports to the specified port group. The port list must be enclosed in quotation marks. Ports must be separated by semicolons. --pgdel pgid "N_Port1 [; N_Port2;...]" Deletes one or more N_Ports from the specified port group. Deleted ports are added to the default port group "pg0". The port list must be enclosed in quotation marks. Ports must be separated by semicolons. --pgrename pgid newname Replaces the name of an existing port group with the specified new name. The port group ID must not exceed 64 characters. --pgremove pgid Deletes the specified port group. The N_Ports in the port group that was deleted are moved to the default port group, which is pgid 0. --pgmapadd pgid "F_Port1[;F_Port2;...]" Maps the specified F_Ports to the PG identified by the pgid. Upon execution, the system identifies the least loaded N_Port in the port group and maps the F_Ports to that N_Port. The port list must be enclosed in double quotation marks. Ports must be separated by semicolons. Login balancing (LB) mode must be enabled on the port group for this command to succeed. Use ag --pgsetmodes to enable LB mode. 24 Fabric OS Command Reference 53-1001337-01