Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 112

Section 5 OTHER CONVENIENT FUNCTIONS % Selecting the location of copy ejection If the optional Document Finisher or Multi Job Tray is installed on your copier, this procedure lets you select the location for the ejection of finished copies. 1 Touch the "Edit" key. Then, in the resulting screen, touch the "Select of Output" key. The "Select of Output" screen will be displayed. Inch specifications Ready to Job build. Place originals then press Start key. Job Build - Step1 Off Border Erase None Margin/ Centering Basic Auto Select orig.size None Page # Quality Off Modify Copy Tray A Select of Output Edit 2 sided copy-Left Finished page # : 0 Set End Insert page Print from Rear page Metric specifications Ready to Job build. Set original. Press Start key. Job Build - Step1 None Erase Mode None Margin/ Imag.shift Basic Auto Select size original None Page numbering Quality None Modify copy Tray A Select of Output Edit 2-sided Copy-Left Finished page #: 0 Set End Insert blank page Print from Rear page NOTES • This setting will only be displayed when the optional Document Finisher or Multi Job Tray is installed on your copier. • The setting in regard to the location of copy ejection can only be made in the first step of the job build mode and will apply to all steps in the copy job. 2 Select the desired location for the ejection of finished copies. Inch specifications Ready to Job build. Place originals then press Start key. Select of Output Back Set Close Auto Tray A Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Select proper output tray to avoid mixing job. You can confirm output tray with output management. Metric specifications Ready to Job build. Set original. Press Start key. Select of Output Auto Tray A Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Back Set Close Select proper output tray to avoid job mixing. You can confirm output tray with output management. 3 Touch the "Close" key. The touch panel will return to the screen in step 1. 5-70