Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 167

3 Touch the "+" key or the "-" key to change the displayed time difference to the desired setting. Inch specifications Time difference Back Close GMT+ 00 : 00 Default setting - Machine default Metric specifications Time difference GMT+ 00 : 00 Back Close Default setting - Machine default NOTE If you want to quit the displayed setting without changing it, touch the "Back" key. The touch panel will return to the screen in step 2. 4 Touch the "Close" key. The touch panel will return to the screen in step 2. 5 Touch the "Close" key once again. The touch panel will return to the "Default setting" screen. 6 Touch the "End" key. The touch panel will return to the contents of the "Basic" tab. Section 7 COPIER MANAGEMENT FUNCTIONS ● Changing the management code Perform the following procedure to change the management code used by the copy manager. IMPORTANT! If you change the management code from its factory default, be sure to keep some sort of record of the new management code. If, for any reason, you forget the registered management code, you will need to contact your service representative. 1 Display the "Machine default" screen. (See "(2) Accessing the machine default settings" on page 7-21.) Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 2 Select "Management code change" ["Change MGMT code with #"] in the settings list on the left side of the touch panel and then touch the "Change #" key. The "Management code change" ["Change MGMT code with #"] screen will be displayed. Inch specifications Default setting Machine default Default menu Silent mode Date/Time Time difference Management code change Auto shut-off Default setting Setting mode Off 2001/10/30 14:02 GMT+08:00 4500 On Change # Close Up Down Metric specifications Default setting Machine default Default menu Silent mode Date/Time Time difference Change MGMT code with # Auto shut-off Default setting Setting mode Off 30/10/'01 14:02 GMT+08:00 4500 On Change # Close Up Down 7-33