Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 222

Section 9 TROUBLESHOOTING Message Procedure Reference page "Paper capacity exceeded. Remove The number of copies stored in the optional Document Finisher has exceeded the - paper from Finisher." acceptable limit. Remove the copies from the Document Finisher. "Remove paper from inner tray of There are still copies left in the optional Document Finisher. Remove all of the copies - Finisher." from the Document Finisher. "Remove paper from Finisher." There are still copies left on the tray(s) of the optional Document Finisher or inside the - Document Finisher itself. Remove all of the copies from the Document Finisher. Check paper in Finisher. Incomplete There are unfinished copies among those that have been ejected into the optional - copies inside. Document Finisher. "Cannot sort this size." ["Cannot sort The selected paper size cannot be used in the sort/finished mode. For more detailed - this paper size."] information, refer to the Operation Guide for your Document Finisher. "Cannot staple. _____:maximum The number of copies stapled in the optional Document Finisher has exceeded the - capacity (Staple)" acceptable limit. For more detailed information, refer to the Operation Guide for your ["Cannot staple. _____ :Max. Document Finisher. staples"] "Cannot staple this paper type." The selected paper type cannot be stapled. Select a different type of paper. - "Cannot punch this size." The selected paper size cannot be hole punched. For more detailed information, refer to - ["Cannot punch this paper size."] the Operation Guide for your Document Finisher. "Cannot punch this paper type." The selected paper size cannot be hole punched. Select a different type of paper. - "Staple jam. Remove staples." Staples have jammed in the optional Document Finisher. Refer to the Operation Guide - ["Staple jam. Remove staple(s)."] for your Document Finisher and remove the jammed staples. "Check the waste punch box." The hole punch chad box in the optional Document Finisher is full. Refer to the - ["Check Punch Hole box."] Operation Guide for your Document Finisher and dispose of the hole punch chad. "Out of staples. Add staples." ["Stapler empty. Add staples."] There are no staples left in the optional Document Finisher. Refer to the Operation Guide - for your Document Finisher and load staples. "Cannot staple this size." Stapling of small size paper, such as 5 1/2" x 8 1/2" and A5R, is not possible. For more - ["Cannot staple this paper size."] detailed information, refer to the Operation Guide for your Document Finisher. "Tandem Copy is cancelled. Unable Tandem copying (option) is not possible. Touch the "Check" key and check the copy - to Tandem Copy under current settings. setting." ["Cancel tandem copy. Cannot tandem copy with the present setting."] "The waste toner box almost full." It is almost time to replace the waste toner box. Contact your service representative or - ["The waste toner container is an authorized service center. almost full."] "The waste toner box is full." It is time to replace the waste toner box. Contact your service representative or an - ["The waste toner container is full."] authorized service center. 9-4