Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 172

Section 7 COPIER MANAGEMENT FUNCTIONS (5) Accessing the copy default settings Perform the following procedure when you want to access the screens for each of the various copy default settings. 1 With the content of the "Basic" tab displayed, press the [ ] key. The "Default setting" screen will be displayed. 2 Touch the "Copy default" key on the left side of the touch panel. Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 4 If the entered code matched the registered one, the "Copy default" screen will be displayed. Inch specifications Default setting Copy default Default menu Exposure mode Exposure steps Original image quality Original size (custom1) Original size (custom2) Default setting Setting mode Manual 1 step Text + Photo Off Off Change # Close Up Down Metric specifications Default setting Copy default Default menu Exposure mode Exposure steps Image quality original Original size (custom1) Original size (custom2) Default setting Setting mode Manual 1 step Text + Photo Off Off Change # Close Up Down NOTES • It is possible for you to change the 4-digit management code. (See "Changing the management code" on page 7-33.) • Refer to the desired procedure(s) explained under "(6) Making copy default settings" and perform the corresponding setting(s). 3 Use the keypad to enter the 4-digit management code. The factory default setting for 45 cpm copiers is "4500" and for 55 cpm copiers is "5500". Inch specifications Enter the administrator number Close Metric specifications Enter the administrator number Close 7-38