Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 219

Section 9 TROUBLESHOOTING 1. If one of the following messages is displayed When any of the following messages appears on the message display, take the indicated action. Message Procedure Reference page "Close xxx cover." The indicated cover is open. Close all covers securely. - "Check the cover." ["Check cover."] Check for an open cover and close it securely. - "Close Document processor." Close the Document Processor. - "Add paper in drawer." ["Add paper cassette. "] There is no more paper in the displayed drawer[cassette]. Load paper. If there is another 3-1 drawer[cassette] that contains the same size of paper in the same orientation, touch the desired paper size key on the left side of the touch panel to switch paper feed and resume copying. "Open drawer xx, check and remove Check to see if paper has misfed inside one of the drawer[cassette]. if it has, remove the 9-6 paper from inside of the machine." jammed paper. ["Open cassette 1, check and remove paper from inside of machine."] "Set drawer xx. " ["Close paper One of the drawers[cassettes] is not closed properly. First pull it out, and then push it all - cassette xx."] the way back in. "Reset feeding unit for paper Pull out both drawers[cassettes] No.3 and No.4 and push the Paper Feeder Unit 9-8 drawer." ["Reset feeding unit for securely all the way into the copier. pap.cassette."] "Paper drawer is out of order. The drawer[cassette] currently in use is out of order and cannot be used for the moment. - Select another paper drawer." Contact your service representative or an authorized service center as soon as possible. ["Paper cassette is out of order. If you want to continue copying, use another drawer[cassette]. Select other paper cassette."] "Low on paper." Paper is running low in the selected drawer[cassette]. 3-1 "Paper deck is out of order. The optional Side Feeder is out of order and cannot be used for the moment. Contact - select another paper drawer." your service representative or an authorized service center as soon as possible. If you ["Paper cassette is out of order. want to continue copying, use another drawer[cassette]. Select another paper cassette."] "Add paper in paper deck." Load paper in the optional Side Feeder. 3-5 "Bypass cannot be used. The multi-bypass tray is out of order and cannot be used for the moment. Contact your - Select another paper drawer." service representative or an authorized service center as soon as possible. If you want ["Bypass cannot be used. to continue copying, use another drawer[cassette]. Select a paper cassette."] "Load Bypass." There is no more paper on the multi-bypass tray. Set paper onto the multi-bypass tray. 3-4 "Add paper in bypass." There is no more paper on the multi-bypass tray. Set paper onto the multi-bypass tray. 3-4 ["Add paper on stack bypass."] 9-1