Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 65

1 Set the originals to be copied in the Document Processor. IMPORTANT! If you are using the platen, be absolutely certain to set the first original first. 2 Touch the "Function" tab. The content of the "Function" tab will be displayed. 3 Touch the "Booklet" key. The "Booklet" screen will be displayed. Inch specifications Ready to copy. Paper size Set 11x81/2" Select paper Exposure mode Orig.image quality Sort/ Finished Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select orig. size Auto Selection Page # Cover Mode Function Combine Batch scanning Forms Overlay Booklet Program Up Down Metric specifications Ready to copy. Select paper Exposure mode Image quality Sort/ Finished Basic 2-sided/ Split Reduce/ Enlarge Margin/ Imag. shift Erase Mode User choice Select size orig. Auto selection Page numbering Cover Mode Function Merge copy Large # of originals Form overlay Booklet Program Paper size Set Up Down 4 Touch the "Booklet" key. The screen to specify the binding direction of the originals and the finished copies will be displayed. Inch specifications Ready to copy. Paper size Set 11x81/2" Booklet Register Back Close None Booklet Book ➔Booklet Metric specifications Ready to copy. Booklet Edit one or two sided original pages and out put a book. Use Book-booklet for book original. Register Paper size Set Back Close None Booklet Book RBooklet Edit 1- and 2-sided originals and output as book. Use BookRbooklet for book original. Section 5 OTHER CONVENIENT FUNCTIONS 5 Specify the binding direction of both the originals and the finished copies. Inch specifications 2 sided mode. Paper size Set 11x81/2" Booklet None Booklet Book ➔Booklet Original 1-sided 2-sided Left/Right 2-sided Top/Bottom Finishing Open from left Open from right Open from top Register Stitching Off Stitching Front cvr Saddle Stitch Back Close Check direction Check direction of original top side. Rear Left top corner Metric specifications Duplex Mode. Booklet None Booklet Book RBooklet Original 1-sided 2-sided Left/Right 2-sided Top/Bottom Finished Left binding Right binding Top binding Register Stitching Off Stitching Front cov. Center Staple Paper size Set Back Close Check direction Check direction of original. Back Edge Left top corner 6 If the optional Document Finisher is installed on your copier, the "Saddle Stitch" ["Center Staple"] key will be displayed and you will be able to select center stapling. If the optional Center-Folding Unit is installed as well, you will be able to center fold those stapled sets. In this case, if you DO want the center stapling operation, or the center stapling and folding operation, to be performed, touch the "Saddle Stitch" ["Center Staple"] key and go to the next step. If you do NOT want either operation to be performed, go directly to step 8. Inch specifications 2 sided mode. Paper size Set 11x81/2" Booklet None Booklet Book ➔Booklet Original 1-sided 2-sided Left/Right 2-sided Top/Bottom Finishing Open from left Open from right Open from top Register Stitching Off Stitching Front cvr Saddle Stitch Back Close Check direction Check direction of original top side. Rear Left top corner Metric specifications Duplex Mode. Booklet None Booklet Book RBooklet Original 1-sided 2-sided Left/Right 2-sided Top/Bottom Finished Left binding Right binding Top binding Register Stitching Off Stitching Front cov. Center Staple Paper size Set Back Close Check direction Check direction of original. Back Edge Left top corner 5-23