Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 162

Section 7 COPIER MANAGEMENT FUNCTIONS 2 Select "Auto shut-off time" in the settings list on the left side of the touch panel and then touch the "Change #" key. The "Auto shut-off time" screen will be displayed. Inch specifications Default setting Machine default Default menu Paper type(5rd drawer) Select paper type(2sided) Select paper (Used Paper) Sel. (High resist. paper) Auto shut-off time Default setting Setting mode Plain 90 Minute Change # Close Up Down Metric specifications Default setting Machine default Default menu Paper type (5rd cassette) Select paper type(2sided) Select 'used paper' type Sel.'High resist.paper' Auto shut-off time Default setting Setting mode Plain 90Minute Change # Close Up Down 3 Touch the "+" key or the "-" key to change the displayed time to the desired setting (between 15 minutes and 240 minutes). Inch specifications Auto shut-off time Select auto shut-off time after last setting, or when copying is done. Minute + - Back Close Default setting - Machine default Metric specifications Auto shut-off time Select auto shut-off time after last setting, or when copying is done. Minute Back Close Default setting - Machine default NOTES • It is recommended that you try to set a longer time interval before auto shut-off engages if you use the copier frequently, and to a shorter time if there are long intervals between use. • If you want to quit the displayed setting without changing it, touch the "Back" key. The touch panel will return to the screen in step 2. ● Auto preheat time Perform the following procedure to set the amount of time between the point that copying ends and the energy-saving preheat mode engages. 1 Display the "Machine default" screen. (See "(2) Accessing the machine default settings" on page 7-21.) Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 2 Select "Auto preheat time" in the settings list on the left side of the touch panel and then touch the "Change #" key. The "Auto preheat time" screen will be displayed. Inch specifications Default setting Machine default Default menu Auto preheat time Key sound ON/OFF Silent mode Date/Time Time difference Default setting Setting mode 15 Minute On Off 30/10/'01 14:02 GMT+08:00 Change # Close Up Down Metric specifications Default setting Machine default Default menu Auto preheat time Key sound ON/OFF Silent mode Date/Time Time difference Default setting Setting mode 15Minute On Off 25 / 10 / '01 14:02 GMT+00:00 Change # Close Up Down 4 Touch the "Close" key. The touch panel will return to the screen in step 2. 5 Touch the "Close" key once again. The touch panel will return to the "Default setting" screen. 6 Touch the "End" key. The touch panel will return to the contents of the "Basic" tab. 7-28