Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 25
Loading paper into the Side Feeder an optional, drawer[cassette] only available for 55 cpm copiers
View all Kyocera KM-5530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
(5) Loading paper into the Side Feeder (an optional drawer[cassette] only available for 55 cpm copiers) Up to 4000 sheets of 11" x 8 1/2" or A4 size standard copy paper (75 g/m2 - 80 g/m2) or color paper can be loaded into the optional Side Feeder. 1 Hold down the paper plate up/down switch located on the right side of the Side Feeder. Section 3 PREPARATIONS 3 Align the paper flush against the left side of the paper plate, and then set the paper in the Side Feeder. NOTES • If there is no paper in the Side Feeder, the paper plate inside the Side Feeder will already have been lowered automatically to its lowermost position. • If the right cover to the Side Feeder is open, the paper plate will not move even if you press this switch. 2 Open the right cover to the Side Feeder. IMPORTANT! • Make sure there are no folds, etc., in the paper you load into the Side Feeder. Folds, etc., can cause paper jams. • DO NOT load more paper than is indicated by the label located on the inside of the Side Feeder (shown as 1 in the illustration). • When you are loading paper into the Side Feeder, make sure that the side to be copied onto is facing upward. (The copy side is the side facing upward when the package is opened.) 1 4 Close the upper cover, if necessary, and then close the right cover. NOTE If you open the upper cover as well, it will be easier to load paper into the Side Feeder. NOTE If you will not be using the copier for a prolonged period of time, remove all paper from the Side Feeder and seal it in its original packaging in order to protect it against moisture. 3-5