Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 228

Section 9 TROUBLESHOOTING ● Misfeed in the multi-bypass tray ("JAM 14") If the message above is displayed, a misfeed has occurred in the multi-bypass tray. Perform the following procedure to remove the jammed paper. Inch specifications Paper misfeed. 1.Remove paper from Multi purpose tray. JAM 00 Metric specifications Paper misfeed. JAM 00 1.Remove paper from multi purpose tray. 1 If the optional Side Feeder is installed in the copier, disconnect it from the main body of the copier. 2 Open the right cover. 1 Remove all of the paper remaining in the multi-bypass tray. 3 Remove the jammed paper without tearing it. * If the paper does happen to tear, remove any loose scraps from inside the copier. 2 Reset the paper in the multi-bypass tray. ● Misfeed inside the right cover ("JAM 18" through "JAM 22" or "JAM 24" through "JAM 29") If one of the messages above is displayed, a misfeed has occurred inside the right cover. Perform the following procedure to remove the jammed paper. Inch specifications Paper misfeed. JAM 00 1.Open right cover. 2.Remove paper. 3.Close cover. 4 Close the right cover. 5 If necessary, reconnect the Side Feeder to the copier. Metric specifications Paper misfeed. JAM 00 1.Open right cover. 2.Remove paper. 3.Close cover. 9-10