Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 235

11 Open the upper cover to the Duplex Unit and remove any jammed paper without tearing it. Close the upper cover and then go to the next step. Section 9 TROUBLESHOOTING 5 Misfeed in the Document Processor ("JAM 70" through "JAM 76") If one of the messages above is displayed, an original has misfed in the Document Processor. Perform the following procedure to remove the jammed original. Inch specifications Paper misfeed. JAM 00 1.Open cover of Document processor. 2.Lift reversing unit up. 3.Turn the left dial. 4.Remove original. 5.Close cover of Document processor. 12 Undo the 2 green screws on the bottom of the Duplex Unit. Metric specifications Paper misfeed. JAM 00 1.Open cover of Document processor. 2.Lift reversing unit up. 3.Turn the left knob. 4.Remove original. 5.Close cover of Document processor. 1 21 13 Lower the Duplex Unit guide plate open and remove any jammed paper without tearing it. 1 Remove all of the originals remaining in the original table. 2 Open the Document Processor cover. 14 Close the guide plate and reattach the 2 green screws. 15 Replace the Duplex Unit in its original position in the copier. 16 Close the front cover. 9-17