Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 154

Section 7 COPIER MANAGEMENT FUNCTIONS Default setting Description Copy eject location Sets the location for the ejection of finished copies. * This setting will only be displayed when the optional Document Finisher or Multi Job Tray is installed on your copier. Available settings Tray A Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 Factory setting Tray A Reference page 7-29 Touch panel sound ON/ Sets whether or not the touch panel will emit a "beep" On / Off On OFF sound each time a key is touched. 7-30 Silent mode ON/OFF The copier can be switched to a silent mode, which On / Off Off shortens the length of time that the laser data writing motor continues to spin after each copy job is finished. Turn the silent mode ON if the noise of the motor bothers you in any way. 7-31 Day & time Sets the current date and time. Time difference Sets a designated time difference. Year: 2000-2099 Month: 1 - 12 Day: 1 - 31 Time: 00:00 - 23:59 Year: '00 Month: 01 Day: 01 Time: 00:00 +12:00 - -12:00 00:00 7-31 7-32 Changing the management code Changes the management code that is used by the copy manager. IMPORTANT: If you change the management code from its factory default, be sure to keep some sort of record of the new management code. If, for any reason, you forget the registered management code, you will need to contact your service representative. 0000 - 9999 45 cpm copiers: 4500 55 cpm copiers: 5500 7-33 Auto shut-off ON/OFF Sets whether or not to have the auto shut-off function On / Off On automatically turn the main switch OFF a certain amount of time after copying, or if no operation has been performed on the copier during that time. * If auto shut-off interferes with your copying operations, turn this function OFF. However, it is recommended that you try to set a longer time interval until auto shut- off engages before you actually turn it OFF. 7-34 7-20