Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 32

Section 4 BASIC OPERATION 4 81/2x11" Plain 11x81/2" Color 11x81/2" Plain 11x81/2" Recycled APS Bypass Plain Inch specifications 4 Plain Colour Plain APS BYPASS Plain Recycled Metric specifications 4. Selecting the paper size When the "APS" key is highlighted on the touch panel, copy paper of the same size as the original will be automatically selected. In order to copy the original onto a different size of paper without changing the size of the image, touch the paper size key that corresponds to the paper size that you want to use. NOTES • You can stop the copier from automatically selecting the paper size. (See "Paper selection" on page 7-45.) • It is also possible for you to specify one drawer[cassette] that will be selected automatically regardless of the size of paper loaded in that drawer. (See "Default drawer[cassette]" on page 7-47.) 5 AMS Sort:Off pass in Auto Exposure Sort:On / Reduce /Enlarge Exposure mode Sort/ Finished Inch specifications 5 pass in AMS Reduce/ Enlarge Auto Exposure Exposure mode Metric specifications Sort:Off Sort:On Sort/ Finished 5. Adjusting the copy exposure Adjustment of the copy exposure is generally accomplished manually. If you want to make the exposure darker, touch the right exposure adjustment key to move the arrow under the exposure scale to the right; If you want to make the exposure lighter, touch the left exposure adjustment key to move the arrow under the exposure scale to the left. If you want the copy exposure to be adjusted automatically, touch the "Auto Exposure" key until it is highlighted. The contrast of the original will be detected and the most suitable exposure level selected automatically. Inch specifications Ready to copy. Exposure Mode Register 123 45 67 Auto Manual Lighter Darker Paper Size Set 11x81/2" Back Close Metric specifications Ready to copy. Exposure mode Auto Manual Lighter Register Paper size Set Back Close Darker NOTES • It is possible for you to make adjustments to the auto exposure mode if the overall copies come out too dark or too light. (See "Auto exposure adjustment" on page 7-50.) • It is also possible for you to change the default setting for the copy exposure to the auto exposure mode. (See "Exposure mode" on page 7-39.) 4-2