Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 161

● Paper type (for high-resistance paper) Perform the following procedure to set whether or not the highresistance paper function will be turned on for each custom type of paper (custom 1 - 8). NOTES This setting will only be effective if the corresponding custom paper type (custom 1 - 8) is selected for use in one of the drawers[cassettes], or the multi-bypass tray. Refer to "Paper type (drawer[cassette] No.1 - No.5)" on page 7-24 for selecting the type of paper to be loaded in each drawer[cassette] and to "(1) Paper size and type" on page 7-63 for selecting the type of paper to be set on the multi-bypass tray. 1 Display the "Machine default" screen. (See "(2) Accessing the machine default settings" on page 7-21.) Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 2 Select "Sel.(High resist.paper)" ["Sel.'High resist.paper'"] in the settings list on the left side of the touch panel and then touch the "Change #" key. The "Sel.(High resist.paper)" ["Sel.'High resist.paper'"] screen will be displayed. Inch specifications Default setting Machine default Default menu Paper type(5rd drawer) Select paper type(2sided) Select paper (Used Paper) Sel. (High resist. paper) Auto shut-off time Default setting Setting mode Plain 90 Minute Change # Close Up Down Metric specifications Default setting Machine default Default menu Paper type (5rd cassette) Select paper type(2sided) Select 'used paper' type Sel.'High resist.paper' Auto shut-off time Default setting Setting mode Plain 90Minute Change # Close Up Down Section 7 COPIER MANAGEMENT FUNCTIONS 3 Select the custom paper setting that you want to change and then touch the "On / Off" key. Touch the "On" key to turn the high-resistance paper function ON. Inch specifications Sel. (High resist. paper) Select paper type(s) for High resistance paper. Default menu Custom 1 Custom 2 Custom 3 Custom 4 Custom 5 Custom 6 Custom 7 Setting mode Off Off Off Off Off Off Off Default setting - Machine default Back On/ Off Close Metric specifications Sel.'High resist.paper' Able to select paper type for 'High resistance paper' copy Default menu Custom 1 Custom 2 Custom 3 Custom 4 Custom 5 Custom 6 Custom 7 Setting mode Off Off Off Off Off Off Off Default setting - Machine default Back On/ Off Close 4 Touch the "Close" key. The touch panel will return to the screen in step 2. 5 Touch the "Close" key once again. The touch panel will return to the "Default setting" screen. 6 Touch the "End" key. The touch panel will return to the contents of the "Basic" tab. ● Auto shut-off time Perform the following procedure to set the amount of time that will elapse after copying, or if no operation is performed, before the auto shut-off function turns the copier OFF. 1 Display the "Machine default" screen. (See "(2) Accessing the machine default settings" on page 7-21.) Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 7-27