Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 243

Section 10 MAINTENANCE AND OPERATION INFORMATION Side Feeder This unit is an auxiliary paper feed unit that holds up to 4,000 sheets of standard 11" x 8 1/2" or A4 size copy paper. (Only available for 55 cpm copiers) Document Finisher (A) The Document Finisher stores a large quantity of copies and can sort multiple copy sets (Sort/Finished mode), or it can groups copies made from multiple originals, with all the copies produced from an individual original stacked together in one set (Group mode), by shifting their position of ejection. It can also staple the finished copy sets as well as punch holes in them for filing purposes (optional). If the optional Center-Folding Unit and Multi Job Tray are installed in your copier as well, you will also be able to use the Center-Folding Unit to center bind and center fold the copy sets and designate them for ejection into the Multi Job Tray. Multi Job Tray If the Multi Job Tray is installed in your copier, you can designate finished copies for ejection into that unit. Center-Folding Unit If the optional Center-Folding Unit is installed in your copier, you will be able to use that unit to center bind and center fold your copy sets. Document Finisher (B) The Document Finisher stores a large quantity of copies and can sort multiple copy sets (Sort/Finished mode), or it can groups copies made from multiple originals, with all the copies produced from an individual original stacked together in one set (Group mode), by shifting their position of ejection. It can also staple the finished copy sets as well. If the optional Multi Job Tray is installed in your copier as well, you will also be able to designate finished copies for ejection into the Multi Job Tray. (Only available for 45 cpm copiers) Key Counter The Key Counter is used for checking copier use and is convenient for centralized management of the number of copies made by each department as well as the total number of copies made overall on the machine. Printer Kit If the Printer Kit is installed in your copier, you can use the copier as a printer. For more details, refer to the Operation Guide for the Printer Kit. Since a networking board is installed as standard equipment in the copier, access from multiple computers is possible and the machine can be used as a network printer. Network Scanner Kit If the Network Scanner Kit is installed in your copier, you can use the copier as a scanner from multiple computers over your network. Tandem Copier Kit The Tandem Copier Kit is required when two copy machines are connected together. Connecting two copy machines will increase copy management speed two-fold. In addition, for example, if copying is stopped in one copier due to insufficient toner or other such reason, the remaining copies will be automatically produced in the other copier. 10-5