Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 23

(3) Loading paper into drawers[cassettes] No.3 and No.4 Up to 1000 sheets of 11" x 8 1/2" or A4 size standard copy paper (75 g/m2 - 80 g/m2) or color paper can be loaded into drawer[cassette] No.3 (right side drawer[cassette]). Drawer[Cassette] No.4 (left side drawer[cassette]) can accept up to 1500 sheets of that same size paper. IMPORTANT! The type of paper loaded in each drawer[cassette] must be specified under "Paper type (drawer[cassette] No.1 - No.5)" on page 7-24. Section 3 PREPARATIONS IMPORTANT! • Make sure there are no folds, etc., in the paper you load into the drawers[cassettes]. Folds, etc., can cause paper jams. • DO NOT load more paper than is indicated by the sticker located on the inside of the drawer[cassette] (shown as 1 in the illustration). • When you are loading paper into the drawer[cassette], make sure that the side to be copied onto is facing downward. (The copy side is the side facing upward when the package is opened.) 1 Pull the drawer[cassette] out toward you as far as it will go. 1 2 Align the paper flush against the right side of the drawer[cassette], and then set the paper in the drawer[cassette]. 3 Insert the appropriate paper size label into the front of the drawer[cassette] to indicate the size of paper that is loaded into that drawer[cassette]. 4 Gently push the drawer[cassette] back in. NOTE If you will not be using the copier for a prolonged period of time, remove all paper from the drawers[cassettes] and seal it in its original packaging in order to protect it against moisture. 3-3