Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 137

(2) Accessing the copy management mode settings Perform the following procedure when you want to access the screens for each of the various copy management mode settings. 1 With the content of the "Basic" tab displayed, press the [ ] key. The "Default setting" screen will be displayed. Section 7 COPIER MANAGEMENT FUNCTIONS 3 Use the keypad to enter the 4-digit management code. The factory default setting for 45 cpm copiers is "4500" and for 55 cpm copiers is "5500". If the entered code matched the registered one, the "Management code menu" screen will be displayed. Inch specifications Enter the administrator number Close Metric specifications Enter the administrator number Close 2 Touch the "Management" key on the right side of the touch panel. Inch specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management BOX Management Print Form End Weekly timer Metric specifications Default setting Default setting Copy default Machine default Document Management Language Bypass setting Management Hard Disk Management Print Form End Week timer 4 Touch the key that corresponds to the desired copy management mode setting. The screen for that setting will be displayed. Inch specifications Management menu Management code menu Counter by ID-code Print the list Default setting Print Err. PRT. ID-code Reg./Del. # of copy correct Counter clear copy Off On Close Printer Off On Metric specifications Management mode Management code menu Counter by ID-code Print the list Default setting Print Err. PRT. ID-code Reg./Del. # of copy correct counter clear Copy Off On Close Printer Off On NOTES • It is possible for you to change the 4-digit management code. (See "Changing the management code" on page 7-33.) • Refer to the desired procedure(s) explained under "(3) Making copy management settings" and perform the corresponding setting(s). 7-3