Kyocera KM-5530 KM/Ri 4530/5530 Operation Guide Rev 5F - Page 234
sufficient care when working in this area, as there is
View all Kyocera KM-5530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Section 9 TROUBLESHOOTING 4 Turn the green conveyor knob (C) to the left at least 4 full turns. 7 Replace the paper conveyor unit in its original position in the copier. C WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. 5 Pull the paper conveyor unit out towards you as far as it will go. 8 Push the green release lever (B) back up to its original position. B 9 Pull the Duplex Unit out towards you as far as it will go. 6 Remove the jammed paper 10 Remove any jammed paper. 9-16
Section 9
TROUBLESHOOTING
9-16
7
Replace the paper conveyor unit in its original position in the
copier.
8
Push the green release lever (B) back up to its original
position.
9
Pull the Duplex Unit out towards you as far as it will go.
10
Remove any jammed paper.
4
Turn the green conveyor knob (C) to the left at least 4 full
turns.
5
Pull the paper conveyor unit out towards you as far as it will
go.
6
Remove the jammed paper
B
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.
C