Canon XF605 Instruction Manual - Page 147

Select [During Canon Log Output] or [During HDR Output] > Desired option.

Page 147 highlights

Connecting to an External Monitor or External Recorder When using the SDI OUT terminal 1 Select > [¢ Monitoring Setup] > [Range: SDI]. 2 Select [During Canon Log Output] or [During HDR Output] > Desired option. • Repeat the procedure as necessary to select the output range for other terminals or output signals. Options for [Range: SDI] [Full Range]: The signal output will use full range coding. [Narrow Range]: The signal output will use narrow range (video range) coding. 147 When using the HDMI OUT terminal 1 Select > [¢ Monitoring Setup] > [Range: HDMI]. 2 Select [During Canon Log Output] or [During HDR Output] > Desired option. Options [Full Range Priority]: The signal output will use full range coding whenever possible but will change the range automatically according to the capabilities of the connected monitor. [Narrow Range]: The signal output will use narrow range (video range) coding. NOTES • Settings will change depending on the gamma curve component of the [Gamma/Color Space] setting in the custom picture file and the [Gamma/Color Space] setting after a Look File has been applied. When a LUT is applied, settings will change also depending on the gamma curve selected for the output signal. If a user LUT is applied, the output range will be determined by the user LUT's [Range (Output)] setting. • During playback, the applied range is determined according to the gamma used at the time of recording.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238

147
Connecting to an External Monitor or External Recorder
When using the SDI OUT terminal
1 Select
> [
¢
Monitoring Setup] > [Range: SDI].
2 Select [During Canon Log Output] or [During HDR Output] > Desired option.
Repeat the procedure as necessary to select the output range for other terminals or output signals.
Options for [Range: SDI]
[Full Range]:
The signal output will use full range coding.
[Narrow Range]:
The signal output will use narrow range (video range) coding.
When using the HDMI OUT terminal
1 Select
> [
¢
Monitoring Setup] > [Range: HDMI].
2 Select [During Canon Log Output] or [During HDR Output] > Desired option.
Options
[Full Range Priority]:
The signal output will use full range coding whenever possible but will change the range
automatically according to the capabilities of the connected monitor.
[Narrow Range]:
The signal output will use narrow range (video range) coding.
NOTES
Settings will change depending on the gamma curve component of the [Gamma/Color Space] setting in the
custom picture file and the [Gamma/Color Space] setting after a Look File has been applied. When a LUT is
applied, settings will change also depending on the gamma curve selected for the output signal. If a user LUT
is applied, the output range will be determined by the user LUT’s [Range (Output)] setting.
During playback, the applied range is determined according to the gamma used at the time of recording.