Canon XF605 Instruction Manual - Page 98
Colors Bars/Audio Reference Signal, Color Bars, Audio Reference Signal
View all Canon XF605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Colors Bars/Audio Reference Signal Colors Bars/Audio Reference Signal You can have the camera generate color bars and a 1 kHz audio reference signal and output them from the following terminals. 98 LCD monitor Viewfinder SDI OUT terminal HDMI OUT terminal × (headphone) terminal Color bars Ü Ü Ü Ü - Audio reference signal - - Ü Ü Ü Color Bars The camera offers SMPTE, EBU and ARIB color bars. 1 Select > [v Camera Setup] > [Color Bars] > [On]. • The selected color bars appear on the screen. 2 Select > [v Camera Setup] > [Color Bar Type] > Desired option. • The selected color bars will be recorded when you press the REC button. • Turning off the camera or changing the operating mode to MEDIA mode will deactivate the color bars. NOTES • If you set an assignable button to [Color Bars] (A 115), you can press the button to turn the color bars on/off. Color bars cannot be displayed in the following cases: - When slow & fast motion recording is activated. - When the gamma curve component of the [Gamma/Color Space] setting in the custom picture is set to an option other than [BT.709 Wide DR], [BT.709 Normal] or [BT.709 Standard]. Audio Reference Signal The camera can output a 1 kHz audio reference signal with the color bars. Select > [¡ Audio Setup] > [1 kHz Tone] > Desired option. • You can select one of three audio levels (-12 dB, -18 dB, -20 dB), or [Off] to turn off the signal. • The reference signal will be output at the selected level when you display the color bars, and will be recorded when you press the REC button.