Canon XF605 Instruction Manual - Page 69

Zoom Using the Zoom Ring The zoom speed depends on how fast you turn the zoom ring. 1 Set the ZOOM switch to RING. 69 2 Turn the zoom ring to zoom. • The zoom ratio is determined by the position of the zoom ring. NOTES • When you change the ZOOM switch's position from ROCKER to RING, the camera will zoom automatically to the focal length indicated by the current position of the zoom ring. • You can operate the zoom ring even when the camera's controls are locked (A 15). Using the Zoom Rockers Set the ZOOM switch to ROCKER to operate the zoom using one of the zoom rockers (grip/handle). You can also use the RC-V100 Remote Controller or a commercially available remote control connected to the REMOTE terminal. Using the Grip Zoom Rocker You can set the zoom speed of the grip zoom rocker using the menu. With the [User Setting] you can even customize a zoom speed pattern depending on how much you press on the zoom rocker (A 70). 1 Set the ZOOM switch to ROCKER. 2 Move the zoom rocker toward T to zoom out (wide-angle) and toward S to zoom in (telephoto). Grip zoom rocker: Approximate zoom speeds (time required to zoom end-to-end) [v Camera Setup] > [v Camera Setup] > [Zoom Speed Level] [Grip Zoom Speed] [Constant Speed] [Low] [Normal] [High] [Constant] [1] (slowest) [16] (fastest) 4 min 38 sec 4.2 sec 2 min 2.6 sec 1 min 0.9 sec* [Variable] - 4.2 sec - 4 min 38 sec 2.6 sec - 2 min 0.9 sec* - 1 min * When the zoom speed is too fast, it will be more difficult to focus while zooming.